 |
| Why Timber Frame? | Designing your new home | What is included? | Costing | Galleries | Contact |
 |
| DPC | - 150mm plastic below soleplate |  |
| Soleplate | - 140 x 38mm treated | |
| Floor Joists | - 145 x 45mm at 400mm centres (Pre-cut to length) |
|
| Floor Dwangs | - 145 x 45mm/120 x 45mm | |
| Floor Starter Plate | - 145 x 18mm treated | |
| Flooring | - 18mm T & G V313 chipboard | |
| Insulation | - 140mm glassfibre on support membrane |
|
| Typical U Value | - 0.21 W/m²K |
UPPER FLOORS
| Floor Joists | - Size & centres as required by design (Pre-cut to length) |
| Floor Dwangs | - Size & centres as required by design |
| Floor Starter Plate | - 145 x 18/22mm treated starter strip |
| Flooring | - 18/22mm T&G V313 chipboard dependent on joist spacing |
| Insulation | - 100mm sound deadening insulation |
| Ceiling Branders | - 50 x 38mm treated as required by design |
| Plasterboard | - 12.7mm plain plasterboard (tapered edged) on vapour barrier |
EXTERNAL WALL PANELS
| Top & Bottom Plate | - 140 x 38mm treated |
| Studs | - 140 x 38mm treated at 600mm centres |
| Lintels | - 220 x 45mm treated or as required by design |
| Sheathing | - 9.5mm OSB (factory fitted) |
| Breather Membrane | - Glidevale Protect tf200 thermo (factory fitted) |
| Headplate | - 140 x 38mm treated |
| Packer Headplate | - 140 x 14mm treated as required by design |
| Insulation | - 140mm glassfibre (between studs) |
| Plasterboard | - 12.7mm Plain plasterboard (taper edged) on vapour barrier |
| U Value | - 0.28 W/m²K |
 |
ROOF
| Trusses | - Pre-fabricated trusses at 600mm centres |
| - Truss design to suit house type | |
| - Truss clips and hangers as required by design | |
| Wind Bracing | - 100 x 25mm treated |
| Roofing Felt | - Glidevale Protect ‘A1’ or RSD Pro-Breathe Membrane + eaves felt |
| Sarking | - 9.5mm OSB or 22mm treated sarking boards |
| Counter Battens | - 38 x 19mm treated as required by design |
| Tile Battens | - 50 x 25mm treated as required by design |
| Ceiling Branders | - 50 x 38mm treated |
| Valley/Ridge Boards | - 100 x 18mm treated |
| Fascia Board | - 195 x 25mm redwood |
| Soffit | - 9mm WBP ply |
| Gable Peak Panels | - As external wall panels |
| Gable Ladders | - 89 x 38 treated |
| Barge Boards | - 145 x 25mm redwood |
| Ventilation | - Eaves Ventilator as required by design |
| Plasterboard | - 12.7mm Plain plasterboard (taper edged) on vapour barrier |
| Insulation | - 280mm (2 x 140mm) glassfibre to horizontal ceiling |
| - 145mm Kingspan TP10 to sloping ceiling | |
| - 140mm glassfibre to oxter walls | |
| U Values | - 0.13 W/m²K (horizontal ceiling) |
| - 0.21 W/m²K (sloping ceiling) | |
| - 0.27 W/m²K (oxter wall) |
 |
See: Further Specifications
Download: Specification 2009
 Station Road, Duns Berwickshire TD11 3HS Tel: 01361 883785 Fax: 01361 883898 Email: enquiries@fleminghomes.co.uk |